The important raw materials of galvanized seamless pipes have a large pressure resistance. Generally it is difficult to master the method of cutting and cutting conditions in order to smoothly cut out galvanized seamless tubes. So as not to hurt people. In order to better cut the seamless seamless pipes with higher safety factor, the following operation procedures are recommended. Industrial equipment cutting is two ways: external and interior. The basic concept of CNC car tool cutting is broken and welded.
Single -machine span is large, which can produce large thickness, small waste, and zero environmental pollution. The production process will not lead to high temperature, does not affect pipeline raw materials, and is conducive to welding. Water cutting is based on high -pressure pumps and gold steel sand. The wound is neat and neat, the production span is large, but the efficiency is high and low, and the thickness of the production is limited by serious factors.
According to the adjustment of the oxygen valve and C2H2 valve, three different flames can be obtained by changing the hybrid share of CO2 and C2H2: positive flames, oxidation flames and carbonized flames. Cutting and low -temperature plasma cutting work in different ways.
Gas can cut the various metal composite materials that cannot be cut CO2, especially non -colored metal cutting. The expected effect is stronger; its important advantage is that when the thickness of the cutting is not too large, the low -temperature plasma cutting speed is faster, especially when cutting carbon steel metal slices. Essence The oxygen cutting method, the cutting surface is smooth and clean. The heat deformation is small, and the heat affects the area less.
